 |
Share to:
Low Pressure Polyurethane Foam Injection Machine
The low pressure PU foam injection machine is typical product, which has the best balance of cost and performance, can be used for most kinds of foam product, open cell / closed cell, flexible / semi-rigid/ rigid foam product. With the secondary motor driven mixing device, the reaction of two kinds of component will be more even for better quality control and performance.
| Quantity: | |
|---|---|
- GZ series
- BOBO
- PLC controller
- Hydraulic drive
- Low pressure with secondary mixing
- Automatic heating
- with chiller (optional)
- Manual feeding / Automatic pump feeding (optional)
- Solvent cleaning
- 250L
- 380V,50/60Hz, 3Phase (customized)
- Industry grey (Customized)
LOW PRESSURE POLYURETHANE FOAM INJECTION MACHINE
I Description
The low pressure polyurethane foam injection machine is widely used for continuous and discontinuous foam injection work, for different kinds of semi-rigid and flexible foam products making, such as the pillows, mattress, shoes, decorative foams, float, seats and sandwich panel etc.
The low pressure polyurethane foam injecting machine is speical used for large capacity and the micro capacity injection work. With secondary mixing function on the injection head, it is more suitable for resilient foam product. And the cleaing and mainternance work wil be necessary after work finishing.
II Main technical data
| NO | Item | Data |
| 1 | Rated Power | 30 kW |
| 2 | Temperature Control` Power | 2*9 kW |
| 3 | Arm | 2.3 meters long |
| 4 | Output Flux | 50g/s-100kg/s (Optional) |
| 5 | Tank capacity | 30L, 50L, 250L (optional) |
| 6 | Control system | PLC programmable |
| 7 | Heating Type | Automatic |
| 8 | Cleaning Type | Automatic |
| 9 | ISO measuring pump | JLB-28 |
| 10 | Mixing system rotation speed | 2800-5000 r/min |
| 11 | Motor power | 380V, 50HZ, 3 phase, can be customized |
| 12 | Arm type | Mechanical or pneumatic |
| 13 | Dimension | 4100x1250x2300mm (arm included) |
| 14 | Weight | 1350kg |